Last week, we were affected by a couple large tornadoes and our employees houses suffered heavy damage, so please be patient with tickets and shipping. We just returned to the office this week, but will be in/out to deal with insurance and repairs.

Product details

Features
  • Z-Wave 800 Series
  • Animated Notifications*
  • Multi-Tap Scene Control*
  • Smart Bulb Mode
  • Energy Monitoring
  • Z-Wave Associations*
  • Leading & Trailing Edge Dimming
  • Non-Neutral Compatible
  • Multi-Way Compatible

    Please note that asterisked features are built into the firmware and will only be accessible if your hub supports it. Hubs that support these features include: SmartThings, Hubitat and Home Assistant (Z-WaveJS and Z-WaveJSUI).
Additional Features
  • Adjustable Dimming Speed
  • Adjustable Ramp Rate
  • Full Color LED Bar
  • Set Min / Max Dim Level
  • Auto-Off Timer
  • Default Dim Level
  • Overheat Protection
  • Quick Tap To Set Level
  • Individually Addressable LED's
  • Over 50+ Parameters
Tech Specs
  • Power: 120V AC, 60Hz
  • Signal (Frequency): 2.4GHz
  • Operating Temperature Range: 32-95° F (0-35° C)
  • Maximum Load (Watts): 600W Incandescent, 300W LED, 150W CFL
  • Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Module
  • Dimensions: Depth = 1.2" (3.0cm), Height = 2.8" (7.1cm), Width = 1.6" (4.1cm)
  • UL Certified: E528330
  • FCC Certified: 2AQ7V-VZM31SN
  • IC Certified: 24756-VZM31SN
  • Zigbee Certified: ZIG22160ZB331395-24
Compatible Hubs

The Red Series 2-1 Switch works with the following platforms (if you do not see your hub listed, please reach out to support):

SmartThings
Home Assistant - ZHA
Home Assistant - Zigbee2MQTT
HomeSeer
Hubitat

Included in the Box

  • 1x Smart Switch

  • 1x Neutral Wire Jumper

  • Instruction Manual

  • Switch Setup Insert

One Switch to Rule Them All .

For those that desire the best, you've arrived. From the sleek full color LED Bar, to the glossy finish of the switch, to the satisfying click of the paddle, enjoy Z-Wave 800's first and only premium light switch.

But this switch isn't just all looks. Under the hood, we've packed in every idea, every enhancement, and thought through every scenario your smart home could become.

Built by 1,000's of our community members, this switch redefines what smart lighting can be.

FAQs

Please see our knowledge base for more information. Additionally, you can click on the red bubble to start a chat or submit a ticket.

Does this switch require a hub?

Yes, this switch requires a hub that supports Z-Wave.

What is the difference between the Red, White and Blue Series?

To understand the differences between the various series, please check out our article which breaks down the features of each.

Can this be used on fans (exhaust/ceiling) or outlets?

This switch is meant for lighting purposes only and cannot be used to control outlets, fans, or any other inductive/motorized loads. If you want an on/off switch, please check out our Blue Series On/Off Switch (w/Temperature and Humidity Sensing) and if you want a speed control switch for a ceiling fan, please check out our Blue Series Fan Switch.

Can this be used with ballasts or transformers (including LED Strips)

No, this switch cannot be used with any sort of transformer, ballast or LED Strip that has a transformer. We recommend the On/Off Switch (w/Temperature and Humidity Sensing).

Is this switch rated for ELV, MLV or any low voltage lights?

No, this switch does not work with ELV, MLV lights or any low voltage lights. Please use the On/Off Switch (w/Temperature and Humidity Sensing).

Does this switch support 240V or 277V?

No, this switch only supports 120V. If you're looking for a 277V option, please check out our On/Off Switch (w/Temperature and Humidity Sensing).

Can you turn off the LED Bar?

Yes, you can set the LED Bar intensity (off to 100%) when the light is on or off.

Is there a faceplate included? If not, what faceplate do you recommend?

No, there is no faceplate inside the box. We recommend Lutron Claro faceplates as we based our colors off of them.